Watertight Rainwater Catcher ø 110
Watertight Rainwater Catcher ø 110
Watertight Rainwater Catcher ø 110, mounted on the gutter downpipe, allows rainwater harvesting in an outdoor reservoir for in-home and garden use. It is equipped with seals, making it suitable for installation in sealed rainwater drainage systems. It can also be used in systems without seals.
Principle of operation
Water flowing down the gutters is retained in a special catcher chamber which is then discharged through a ø 50 outlet into the reservoir. Excess water is deposited in the central section and flows freely downwards. If necessary, the outlet may be closed to allow the water to run off entirely into the rainwater drainage system.
The catcher is manufactured in four colours, as are all the components of the system. It contains a time-tested UV stabiliser, which effectively protects against negative atmospheric conditions such as sunlight. Comes supplied with a ø 50 plug and seals.
Catchers
Catcher
LWDB110 – brown
Catcher
LWDC110 – black
Catcher
LWDG110 – graphite
Catcher
LWDP110 – grey
Sets
For the convenience of our customers, we have also prepared several sets for self-assembly according to the principle: “ cheaper as a set”.
Catcher Ø110 with plug + Elbow Ø50/90˚ + Stub pipe Ø50×500
ZL1B – brown
Catcher Ø110 with plug + Elbow Ø50/90˚ + Stub pipe Ø50×500
ZL1C – black
Catcher Ø110 with plug + Elbow Ø50/90˚ + Stub pipe Ø50×500
ZL1G – graphite
Catcher Ø110 with plug + Elbow Ø50/90˚ + Stub pipe Ø50×500
ZL1P – grey
Catcher Ø110 with plug Ø50 + Elbow Ø32/90˚ + Stub pipe Ø32×500 + Rubber reducer 50/32 black
ZL2B – brown
Catcher Ø110 with plug Ø50 + Elbow Ø32/90˚ + Stub pipe Ø32×500 + Rubber reducer 50/32 black
ZL2C – black
Catcher Ø110 with plug Ø50 + Elbow Ø32/90˚ + Stub pipe Ø32×500 + Rubber reducer 50/32 black
ZL2G – graphite
Catcher Ø110 with plug Ø50 + Elbow Ø32/90˚ + Stub pipe Ø32×500 + Rubber reducer 50/32 black
ZL2P – grey
Catcher Ø110 with plug Ø50 complete with a cleanout with strainer. We recommend installing a ø 110 cleanout with strainer above the catcher.
This will ensure that the rainwater is clear of debris flowing from the roof (leaves etc.).
ZL3B – brown
Catcher Ø110 with plug Ø50 complete with a cleanout with strainer. We recommend installing a ø 110 cleanout with strainer above the catcher.
This will ensure that the rainwater is clear of debris flowing from the roof (leaves etc.).
ZL3C – black
Catcher Ø110 with plug Ø50 complete with a cleanout with strainer. We recommend installing a ø 110 cleanout with strainer above the catcher.
This will ensure that the rainwater is clear of debris flowing from the roof (leaves etc.).
ZL3G – graphite
Catcher Ø110 with plug Ø50 complete with a cleanout with strainer. We recommend installing a ø 110 cleanout with strainer above the catcher.
This will ensure that the rainwater is clear of debris flowing from the roof (leaves etc.).
ZL3P – grey
Catcher complete with a cleanout with strainer and a universal reducer for gutter pipes.
Another possibility is the application of a reducer to allow for the installation of the catcher on pipes from ø 63 / 70 / 75 / 80 / 90 / 100 to ø110 (it is necessary to change the outlet pipes under the catcher to ø110).
ZL4B – brown
Catcher complete with a cleanout with strainer and a universal reducer for gutter pipes.
Another possibility is the application of a reducer to allow for the installation of the catcher on pipes from ø 63 / 70 / 75 / 80 / 90 / 100 to ø110 (it is necessary to change the outlet pipes under the catcher to ø110).
ZL4C – black
Catcher complete with a cleanout with strainer and a universal reducer for gutter pipes.
Another possibility is the application of a reducer to allow for the installation of the catcher on pipes from ø 63 / 70 / 75 / 80 / 90 / 100 to ø110 (it is necessary to change the outlet pipes under the catcher to ø110).
ZL4G – graphite
Catcher complete with a cleanout with strainer and a universal reducer for gutter pipes.
Another possibility is the application of a reducer to allow for the installation of the catcher on pipes from ø 63 / 70 / 75 / 80 / 90 / 100 to ø110 (it is necessary to change the outlet pipes under the catcher to ø110).
ZL4P – grey
The catcher with the reducer 110/104 for installation into a gutter riser pipe. The catcher with a reducer 110/104 allows for installation after the pipe ø 110 has been cut. Insert the reducer into the lower part of the cut pipe, and into the resulting socket insert the bare end of the upper part of the pipe or another fitting, e.g., a catcher (see set 5).
ZL5B – brown
The catcher with the reducer 110/104 for installation into a gutter riser pipe. The catcher with a reducer 110/104 allows for installation after the pipe ø 110 has been cut. Insert the reducer into the lower part of the cut pipe, and into the resulting socket insert the bare end of the upper part of the pipe or another fitting, e.g., a catcher (see set 5).
ZL5C – black
The catcher with the reducer 110/104 for installation into a gutter riser pipe. The catcher with a reducer 110/104 allows for installation after the pipe ø 110 has been cut. Insert the reducer into the lower part of the cut pipe, and into the resulting socket insert the bare end of the upper part of the pipe or another fitting, e.g., a catcher (see set 5).
ZL5G – graphite
The catcher with the reducer 110/104 for installation into a gutter riser pipe. The catcher with a reducer 110/104 allows for installation after the pipe ø 110 has been cut. Insert the reducer into the lower part of the cut pipe, and into the resulting socket insert the bare end of the upper part of the pipe or another fitting, e.g., a catcher (see set 5).
ZL5P – grey
Catcher Ø110 with plug Ø50 with a reducer 124/110 (allows to connect metal downpipe Ø120 with pipe Ø110)
ZL6B – brown
Catcher Ø110 with plug Ø50 with a reducer 124/110 (allows to connect metal downpipe Ø120 with pipe Ø110)
ZL6C – black
Catcher Ø110 with plug Ø50 with a reducer 124/110 (allows to connect metal downpipe Ø120 with pipe Ø110)
ZL6G – graphite
Catcher Ø110 with plug Ø50 with a reducer 124/110 (allows to connect metal downpipe Ø120 with pipe Ø110)
ZL6P – grey
Karmat has prepared a series of fittings and pipes in the same 4 colours as the catcher, with UV stabilizer, to simplify the connection with the external reservoir. They are intended to aid the connection while maintaining an aesthetically pleasing appearance against the facade thanks to the uniform colour scheme.
Pipes
Pipe ø 32 – brown
Pipe ø 32 – black
Pipe ø 32 – graphite
Pipe ø 32 – grey
Pipe ø 50 – brown
Pipe ø 50 – black
Pipe ø 50 – graphite
Pipe ø 50 – grey
Elbows
Elbow ø 32 / 45°
U3KB4 – brown
Elbow ø 32 / 45°
U3KC4 – black
Elbow ø 32 / 45°
U3KG4 – graphite
Elbow ø 32 / 45°
U3KP4 – grey
Elbow ø 32 / 67°
U3KB6 – brown
Elbow ø 32 / 67°
U3KC6 – black
Elbow ø 32 / 67°
U3KG6 – graphite
Elbow ø 32 / 67°
U3KP6 – grey
Elbow ø 32 / 90°
U3KB9 – brown
Elbow ø 32 / 90°
U3KC9 – black
Elbow ø 32 / 90°
U3KG9 – graphite
Elbow ø 32 / 90°
U3KP9 – grey
Elbow ø 50 / 45°
U5KB4 – brown
Elbow ø 50 / 45°
U5KC4 – black
Elbow ø 50 / 45°
U5KG4 – graphite
Elbow ø 50 / 45°
U5KP4 – grey
Elbow ø 50 / 67°
U5KB6 – brown
Elbow ø 50 / 67°
U5KC6 – black
Elbow ø 50 / 67°
U5KG6 – graphite
Elbow ø 50 / 67°
U5KP6 – grey
Elbow ø 50 / 90°
U5KB9 – brown
Elbow ø 50 / 90°
U5KC9 – black
Elbow ø 50 / 90°
U5KG9 – graphite
Elbow ø 50 / 90°
U5KP9 – grey
Plugs
Plug ø 50
05ZB – brown
Plug ø 50
05ZC – black
Plug ø 50
05ZG – graphite
Plug ø 50
05ZP – grey
Reducers ø 110 / ø 104
The unique reducer ø 110 / ø 104 allows for installation after the pipe ø 110 has been cut. Insert the reducer into the lower part of the cut pipe, and into the resulting socket insert the bare end of the upper part of the pipe or another fitting, e.g., a catcher (see set 5).
Reducer ø 110 / ø 104
ZRSB1 – brown
Reducer ø 110 / ø 104
ZRSC1 – black
Reducer ø 110 / ø 104
ZRSG1 – graphite
